Bafang Bottom Bracket with Integrated Pas-Sensor,2 11/16in,Cable Length 59

Description

Bafang Bottom Bracket with Integrated Pas-Sensor,2 11/16in,Cable Length 59
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
batteries
Engines
display
sensors
Accesories
and much more
Characteristics
The highlights
PAS sensor integrated in the bottom bracket
Precise technology
Ebay plus shipping
Lightning-fast shipping within 24 hours
30 days return policy
Excellent customer service - You will receive a professionally sound answer to your question within 2 working days!
Technical characteristics
32 signals per revolution ensure precise measurements
Normal function of the pedals is retained
Bottom bracket width: 68mm
Cable length: 150 cm
Connector: Jullet 6-pin male
Compatible with: Bafang controllers
Product Information
description
The Bafang PAS sensor SR PA12.32.S is installed in place of the bottom bracket. There, the pedal activity is passed on to the controller with 32 pulses per revolution, thus defining the motor support. The advantage of this technology compared to speed sensors, which also count wheel revolutions when you push, is that the sensor only registers wheel revolutions when you actually pedal. The operating temperature of the sensor ranges from -20 - 45 °C. The sensor weighs 312g and is tested according to the highest industry standards, according to which neither dust nor moisture can penetrate, and has the IP X5 standard.
For assembly you have to remove your bottom bracket. The sensor is screwed on and then with approx. Screwed in at 30Nm. The cable is located in the center of the sensor, so a hole is required in the center of the bottom bracket shell. The supplied seal protects against water and dust. With a cable length of 1.5 meters, you have enough leeway to connect the sensor. Two rubber seals and matching crank bolts are also supplied for the right and left side.
scope of delivery
Bafang PAS sensor SR PA12.32.S: 1 pc.
Gaskets (1 small and 2 lateral): 3 pcs.
Crank bolts: 2 pcs.
our service
Lightning Faster
Shipment
telephone
support
30 days
refund policy
checked
quality goods
customer opinions
Thats what our customers say:
The employees are very friendly and competent. The shipping was lightning fast and I am also very satisfied with the quality of the products (motor and thumb throttle). Recommended!
Camilla Jesus
Everything delivered quickly and securely packaged. All parts fit together perfectly. Outstanding service. Would buy again anytime.
Matthew Stephan Sommer
The e-bike parts are good and above all they fit together. So far also great support, I have answered all my questions, today unfortunately no longer a matter of course. So far I haven't had to send anything back. Keep it up.
Dirk Henkel
Visit us for more information and guidance
§ Please note that in Germany e-bikes and pedelecs are only permitted on public roads, paths and facilities under certain conditions. Please inform yourself about the current regulations in your country before purchasing.
powered by plentymarkets
The Bafang PAS sensor SR PA12.32.S is installed in place of the bottom bracket. There, the pedal activity is passed on to the controller with 32 pulses per revolution, thus defining the motor support. The advantage of this technology compared to speed sensors, which also count wheel revolutions when you push, is that the sensor only registers wheel revolutions when you actually pedal. The operating temperature of the sensor ranges from -20 - 45 °C. The sensor weighs 312g and is tested according to the highest industry standards, according to which neither dust nor moisture can penetrate, and has the IP X5 standard. For assembly you have to remove your bottom bracket. The sensor is screwed on and then with approx. Screwed in at 30Nm. The cable is located in the center of the sensor, so a ho
Marke
Bafang
Akkukapazität
nicht relevant
Batterieart
nicht relevant
Kompatibler Fahrradtyp
Universell
Farbe
Schwarz
Material
Kunststoff
Anzahl der Teile
6
Set enthält
Tretlager mit PAS-Sensor
Set enthält
3 Dichtungen
Set enthält
2 Kurbelschrauben
Herstellernummer
nicht zutreffend
Gewicht
312 g
Breite
68mm
Spannung
36V / 48V
Modell
SR PA12.32.S
Höhe
68mm
Länge
150cm
Teiletyp
Tretlager mit PAS-Sensor
EAN
Nicht zutreffend
Kapazität in Wattstunden
nicht relevant
Markenkompatibilität
Bafang