Bafang Controller for Hub Motor G020 G040 G370,250W 36V,Sinus-Regler

Description

Bafang Controller for Hub Motor G020 G040 G370,250W 36V,Sinus-Regler
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
batteries
Engines
display
sensors
Accesories
and much more
Characteristics
The highlights
High quality and versatile torque controller
Jullet connector system with weather-resistant connectors and simple construction
Ebay plus shipping
Lightning-fast shipping within 24 hours
30 days return policy
Excellent customer service - You will receive a professionally sound answer to your question within 2 working days!
Technical characteristics
Bafang Torque Controller CR S105.250 SN for 36V - 250W Bafang hub motors (selectable)
Maximum current: 13A
Undervoltage protection: 32V
Maximum power at the light output: 3W (voltage corresponds to battery voltage)
Dimensions: 83x53x33mm (L/W/H)
Product description
functionality
This device is the CR S105.250 SN controller for controlling all functions of your e-bike. Devices such as the engine and the lights are switched on/off via the controller, and the information from the PAS sensor, brake sensors and Hall sensor is processed and transmitted to the display. The controller can be perfectly attached to the bike using the controller box and protected from environmental influences. This controller has a sine wave regulator type, which aligns the three phases of the three phase current more efficiently than a square wave regulator. The operating temperature ranges from -20 to 45 °C. The speed limit is set at 25 km/h. The connectors are for the motor cable (9-pin Jullet), battery (2-pin Bullet), 1T4 harness (8-pin Jullet), speed sensor and lights.
compatibility
This controller works with both motors with and without a Hall sensor. The motor connector is a 9-pin Jullet connector.
DANGER
: Please select the controller that matches your Bafang hub motor. Of the
G020
,
G370
and
G040
each require a different version of this controller.
The controller is only compatible with Bafang displays, as these also work with the UART communication protocol and have the corresponding connector. He can distinguish between 9 support levels. Only windmeile brand front and rear lights (with professional connector system) are compatible with this item.
Danger!
In order to be able to connect all components such as the throttle grip, brake sensors and display to the controller, the wiring harness is absolutely necessary. You can find this under "1T4 Wiring Harness" in our shop! To connect to the motor you need either the Bafang or the wind mile motor cable.
data sheet
Efficient
Traceable
Compatible
scope of delivery
Bafang E-Bike Torque Controller CR S105.250 SN: 1 pc.
our service
Lightning Faster
Shipment
telephone
support
30 days
refund policy
checked
quality goods
customer opinions
Thats what our customers say:
The employees are very friendly and competent. The shipping was lightning fast and I am also very satisfied with the quality of the products (motor and thumb throttle). Recommended!
Camilla Jesus
Everything delivered quickly and securely packaged. All parts fit together perfectly. Outstanding service. Would buy again anytime.
Matthew Stephan Sommer
The e-bike parts are good and above all they fit together. So far also great support, I have answered all my questions, today unfortunately no longer a matter of course. So far I haven't had to send anything back. Keep it up.
Dirk Henkel
Visit us for more information and guidance
§ Please note that in Germany e-bikes and pedelecs are only permitted on public roads, paths and facilities under certain conditions. Please inform yourself about the current regulations in your country before purchasing.
powered by plentymarkets
This device is the CR S105.250 SN controller for controlling all functions of your e-bike. Devices such as the engine and the lights are switched on/off via the controller, and the information from the PAS sensor, brake sensors and Hall sensor is processed and transmitted to the display. The controller can be perfectly attached to the bike using the controller box and protected from environmental influences. This controller has a sine wave regulator type, which aligns the three phases of the three phase current more efficiently than a square wave regulator. The operating temperature ranges from -20 to 45 °C. The speed limit is set at 25 km/h. The connectors are for the motor cable (9-pin Jullet), battery (2-pin Bullet), 1T4 harness (8-pin Jullet), speed sensor and lights. The controller is
Marke
Bafang
Modellkompatibilität
G040 / G370 / G020
Akkukapazität
nicht relevant
Batterieart
nicht relevant
Kompatibler Fahrradtyp
Universell
Farbe
silber
Material
Legierung
Anzahl der Teile
1
Set enthält
Controller
Herstellernummer
nicht zutreffend
Gewicht
250g
Breite
53mm
Spannung
36V
Modell
S105.250 SN
Höhe
33mm
Länge
83mm
Teiletyp
Controller
Kapazität in Wattstunden
nicht relevant
Markenkompatibilität
Bafang