DELUXE Empty CISS Compatible Alternative For OfficeJet Pro 7110 7610, CISS-HP932

Description

EMPTY
CONTINUOUS
INK
SUPPLY
SYSTEM
-
CISS
-
CIS
1 x Continuous Ink Supply System Set
FOR PRINTER MODELS
Officejet 6100
Officejet 6600 e-All-in-One
Officejet 6700 Premium e-All-in-One Printer
Officejet 7110 Wide Format
Officejet 7610 Wide Format
Officejet 7612 Wide Format
CARTRIDGE NUMBERS
For 932 - Empty ink cartridge with chip Black x 1 pc
For 933 - Empty ink cartridge with chip Cyan x 1 pc
For 933 - Empty ink cartridge with chip Magenta x 1 pc
For 933 - Empty ink cartridge with chip Yellow x 1 pc
CONDITION
Brand New
ITEM DESCRIPTION
CISS - Continuous Ink System with "Auto Reset Chips" are easy to refill.
Auto reset chips are used, so you do not need to reset the chips manually.
The special design of the system not only provides balanced ink flow to the printer but also protect ink from dust and light.
INKS THAT CAN BE USED
Regular Dye Ink
Sublimation Ink
Pigment Ink
BENEFITS
1.
Brand New Item.
True system ready for "Plug & Play".
2.
High quality and reasonable price.
3.
No sponge, No drilled hole.
4.
Save up to 95% printing cost.
5.
Easy to install.
Good for environmental protection.
6.
Doesn't require you "pump the ink" to get it work.
7.
If you run out of ink, you will only need to buy the refill ink for this system.
Simply pour the ink refill into the tanks.
8.
No more Ink Cartridges purchase.
No more Cartridges replacement.
Refillable ink tanks allow countless refills.
Throw away costly replacement cartridges! Save money with the Continuous Ink System.
9.
Use on any type of paper. The special design of the system not only provide balanced ink flow to the printer but also protect ink from dust and light.
10.
High page yield.
11.
100% Satisfaction guarantee
SHIPPING AND HANDLING
1.
FAST SHIPPING!
2.
It usually takes 2-5 business days to receive the order within United States. Orders to Canada will take longer (7-14 Business Days).
3.
We will deliver to AE, APO, AP, or FPO addresses.
USAGE INFO
DO NOT RAISE INK TANKS ABOVE BASE OF PRINTER
PLEASE CONTACT US PRIOR TO INSTALLING SYSTEM if you have any doubts on how to install your system.
AUTO RESET CHIPS are specifically designed to work with your printer, regardless manufacture date!
PROBLEM
SOLUTION
"
Printer can't recognize cartridges.
":
This message occurs when the chips on the CISS are not seated properly. Take out the cartridges, turn off your printer and unplug it. Wait 30 seconds. Then plug back your printer, turn it on and install the cartridges again, being sure to seat them firmly to hear a good "click". Press down a couple more times with your thumbs on top of the cartridges before completing your cartridge installation.
"Nothing is printing on my pages."
Make sure the air filters are not installed on top of the ink tanks, so the ink can not flow through the system.
"The ink tubes are getting stuck inside of the printer. "
You have to adjust your ink lines and test if it has clearance as the printer carriage moves back and forth during printing. You can do this by setting your printer to allow you to manually push the printer carriage back and forth, while you see where to run your lines and adjust them. Adjust them so they won't get caught and not 'slap around' inside your printer.
"Nothing is printing on my pages."
Make sure the small 'air filters' are installed on top of the ink tanks so the ink can flow through the system and into the cartridges. New printers require time for ink to fully pass through the printer heads before getting clean prints.
"Printer shows that ink levels are low, how do I reset them?"
If this does affect your print out, don't be concerned. Printers have an internal page counter that count how many pages are printed and forces you to replace them after you reach a certain limit. Once that time comes, remove all your cartridges and install them back in, or use your reset button if your CISS came with one. Then you can resume printing.
"There is air in the tubes, is this normal?"
Yes, it is normal because so many people handle it through shipping. If it does not affect your printing, don't be concerned. If it does, then you can run a 1-2 head cleanings to get the air out.
"My problem isn't listed here!"
Remember,
WE'RE HERE TO HELP!!
Send us a message with your contact number and we'll contact you to resolve your issue quickly! CUSTOMER SERVICE IS OUR TOP PRIORITY!!