HP105 Torch Height Controller THC For Arc Voltage CNC Plasma Cutting Machine 1:1

Description

HP105 Torch Height Controller for Arc Voltage CNC Plasma Cutting Machine DC24V
Description
HP105 plasma arc voltage height controller is equipped with constant current plasma. During cutting  course, the current always equals the given current, and the cutting arc voltage will be changed with the fixed speed being the height of torch changing.
When the distance gets farther, the arc voltage increases; On opposite, the arc voltage will decrease.  HP105 plasma arc voltage height controller will inspect the voltage change, then control the distance between cutting torch and material via the lift motor. So that the arc voltage is fixed, the same is the height of cutting torch. Generally, the instruction will list all the cutting parameters for some type of plasma.
The user can refer to these parameters, adjust the voltage in arc voltage height controller to match the selected current. The torch height will keep constant under regular speed. In fact, the user should set the arc voltage according to the height of the cutting torch. In the status of automation ,the arc voltage more high, then the height of the cutting torch more high.
Specification:
Input voltage: DC 24, 2A
Lift motor: DC 24V Permanent magnet DC motor
Output power: 45W
Drive mode: PWM
ARC range: 30 - 250V
ARC accuracy: 1V - 5V
Initial positioning: 1. Proximity  switch initial positioning (mechanical switch)
2. Contact initial positioning (requires isolation and positioning  box)
Divided voltage ratio: 100 : 1
Working temperature: -10 ~ 60℃
Protection class: IP64, to prevent  dust from entering
Installation connector: 2-pin, 4-pin,  5-pin, DB-9 core
Installation position: keep away from  heat, air convection good place.
Dimension: 225*80*49mm; package size:  275*100*100mm
Weight: 0.8kg / 1.1kg
Function Description:
LCD: display the working status and parameters.
Manual: Auto / Manual mode selection  increase, alternating work.
Arc test: standby press, arcing into  the test mode. When arcing test, press to return to standby mode.
Menu: In standby mode press to enter  the parameter setting mode.
When the parameter setting Press to  return to standby.
Confirmation: parameter setting mode,  confirm that the set parameters.
Rise / fall: In standby mode, manual lifting torch. When parameter setting, subtraction parameter values.
What in Package:
1 x   HP105 Torch Height Controller
NOTE:
1.Your valid phone number is  very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by  buyers.
3.As has been stated on the eBay item description, Import duties, taxes and  charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend  on the buyer local customs office.