Portable 300 Plasma Height Controller Arc Voltage Torch Height Controller THC Y

Description

New Portable300 Plasma Height Controller Arc  Voltage Torch Height Controller THC H
Specification:
Model:XPTHC-Portable300
Work Power supply:AC24V±10%，50Hz/60Hz
Adapter motor: DC24V DC motors
Drive mode: PWM (Pulse Width Modulation)
Output Current: 1A-2A
Maximum power: 40W
Working temperature: height controller -10 ~ 60 ℃
Voltage Divide ratio :100:1
Control accuracy :±1V ~ ±3V
Size :length x width x height:2175mm x 225mm x  80mm
The speed of lifting:800mm/min ~ 3000mm/min  (Contact the supplier if it exceeds the range of speed）
Set arc voltage range: 30V ~ 250V
Overload protection: PWM pulse width adjustment,  over-current protection
Maximum cutting test speed : 6000mm/min
Application:
XPTHC- Portable 300 supports almost all plasma cutters on market  like Hypertherm, Thermal Dynamics.
And it supports all CNC cutting controllers on market like  Hypertherm, Burny industrial level controllers or Mach3 such DIY  controllers, because XPTHC-Portable 300 can start Auto Height  control with or without Auto enable signal from CNC. But with  Auto enable/disable signal from CNC, THC would work better.
Functions of XPTHC-Portable 300
Auto Initial Height Sensing(IHS), Dual speed IHS
Torch Retaining Cap IHS and Proximity Switch IHS
NPN Proximity Switch IHS is backup for Torch Retaining Cap IHS  for cutting dirty/rusty workpiece,
needing the Anti-Collision Fixture
Dual speed of IHS
During IHS, THC receives arc start signal from CNC, lift down  z-axis lifter for 2 seconds(adjustable), then change to another  much lower speed(1/4 of previous speed) to touch the workpiece  for IHS.
It effectively raises the precision of IHS and protects torch  retaining cap.
Torch Anti-Collision Function
We designed Touch-Up circuit for Anti-Collision Function. No  matter it is on Auto Control Model or Manual Control Model, when  torch head touches the workpiece,
THC would automatically lift torch up to IHS height. So with  XPTHC-Portable 300, even in Manual Control Mode, user no needs  to worry about torch head