Skid Mounted Pond Filter System w/ Pump UVC Plumbing Just Plug in and RUN-1800g

Description

These deluxe filtration systems combine a pressurized bead filter with
an external self priming pump and a UV clarifier into one completely
plumbed, ready to install, “plug and go” filter system. Simply plumb your
incoming and outgoing water lines and you are ready to go!
• All plumbing is completed and unions included at all connection
points allowing for easy maintenance down the road
• Electrical post complete with 115v power outlet and 15' power cord
for easy “plug and go” installation
• Plumbing includes a bypass line around filter/UV + Filter w/ backflush upgrade
SMF6000 Deluxe skid mounted filtration systems offer complete filtration for water gardens, koi ponds, hybrid ponds and fish systems. A pressurized bead filter, external self-priming pump and UV clarifier pre-plumbed and ready to install as a “plug and go” pond filtration system. Four sizes available for 1,800 to 10,000 gallon ponds.
These deluxe filtration systems combine a pressurized bead filter (above) with an external self priming pump and a UV clarifier into one completely plumbed, ready to install, “plug and go” filter system.
Simply plumb your incoming and outgoing water lines and you are ready to go. All plumbing is completed and unions included at all connection points allowing for easy maintenance down the road•
Electrical post complete with 115v power outlet and 15' power cord for easy “plug and go” installation
Plumbing includes a bypass line around filter/uv
Filter comes complete with backflush blower upgrade
Three year warranty on entire filtration package (excludes UV bulb and sleeve
Model
Max Pond Size
Filter
Pump
UV
Skid Size
SMF1800
1800 Gallons
PBF1800
EXP3700
EPU36N
33" x 33"
SMF3600
3600 Gallons
PBF3600
EXP4900
EPUV35
33" x 33"
SMF6000
6000 Gallons
PBF6000
EXP6800
EPUV55
33" x 33"
SMF10000
10000 Gallons
PBF10000
EXP7800
EPUV75
48" x 48"
PBF1800 EasyPro Pressurized Bead Filter – 1800 gallon maximum
Specifically designed for use with water gardens, koi ponds and hybrid ponds, EasyPro pressurized bead filters offer superior mechanical and biological filtration for clean, clear water. Beneficial bacteria colonize on the surface of the Ultimate Tube Media used in these filters. Beneficial bacteria help break down fish toxic ammonia and create a healthier environment for aquatic life. A properly sized and installed filter will provide excellent water quality for maximum pond enjoyment!
Consider it a ninja pre-wash cycle for filters!
Regular back flushing is required to clear bead filters of
waste. Using an Air Blower first to loosen debris makes
back flushing faster, more efficient and more effective.
Details
PBF1800 EasyPro Pressurized Bead Filter – 1800 gallon maximum
Mechanical and biological filtration for water gardens, koi ponds, hybrid ponds and fish systems
Strong, heavy duty, polyethylene filter body
Simple to set up and assemble
Easy back flush – uses six position control head
Includes Ultimate Tube Media
Minimal back pressure – high flow rate media creates very little back pressure
Back flush waste line has clear section to easily monitor cleaning cycle
1-1/2″ inlet/outlet lines with unions included
Additional Information
Max Flow Rate 30 gpm
Dimensions 16" diameter x 31" tall
Pond Size 1800 gallons
Inlet 1-1/2"
Outlet 1- 1/2"
Weight 38
General things to consider for installation:
1. If the filter is placed in a room there should be a drain system in the room in
case of failure or breakage of plumbing as well as adequate ventilation for
pumping equipment.
2. If the system is installed below pond level it is important to install isolating
valves to prevent risk of flooding.
3. The filter, pump, plumbing and UV should have adequate space around it
for ease of maintenance and service with unit label facing the front to allow
identification in case of service difficulties.
4. Plastic fittings should be used for all plumbing connections.
5. Install the filter as close to the pump as possible. Use correctly sized
plumbing to minimize friction loss and maximize efficiency.
FAQ’S:
When do I need to backwash the filter?
It is recommended to backwash the filter every week. Every pond is different, however,
and sometimes it may be necessary to backwash less often or more often.
Take notice of the pond conditions and observe how often it will be necessary to
backwash your filter.
How much head pressure loss should I account for?
There is approximately 5'-12' of head loss in this filter depending on how dirty the
filter is.
Can this be my only filter?
Yes, this filter can be your only filter. Other types of filtration can be used in conjunction
with these pressure filters as well. Many pond systems use the mechanical filtration
of pond skimmers and strainer baskets on external pumps. UV filtration can also
be after the EasyPro pressurized filter for increased water clarity.