UNO-PS/1AC/24DC/ 240W 24V DC 10A 240W power supply 2904372

Description

Product Description
UNO POWER power supplies - compact with basic functionality
Thanks to their high power density, compact UNO POWER power supplies offer the ideal solution for loads up to 240 W, particularly in compact control boxes. The power supply units are available in various performance classes and overall widths. Their high degree of efficiency and low idling losses ensure a high level of energy efficiency.
Dimensions
Width
45 mm
Height
130 mm
Depth
125 mm
Installation distance right/left
0 mm / 0 mm
Installation distance top/bottom
30 mm / 30 mm
Back to top
Ambient conditions
Degree of protection
IP20
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested)
-25 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Degree of pollution
2
Back to top
Input data
Nominal input voltage range
100 V AC ... 240 V AC
Input voltage range
85 V AC ... 264 V AC (< 95 V AC Derating 1 %/V)
AC frequency range
50 Hz ... 60 Hz
Frequency range (f
N
)
50 Hz ... 60 Hz 10 %
Current consumption
2.69 A (100 V AC)
1.08 A (240 V AC)
Nominal power consumption
260 VA
Inrush current
< 80 A (typical)
Mains buffering time
> 10 ms (120 V AC)
> 10 ms (230 V AC)
Input fuse
5 A (slow-blow, internal)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Power factor (cos phi)
0.99
Type of protection
Transient surge protection
Protective circuit/component
Varistor
Back to top
Output data
Nominal output voltage
24 V DC ±1 %
Setting range of the output voltage (U
Set
)
24 V DC ... 28 V DC ±1 %
Nominal output current (I
N
)
10 A (-25 °C ... 55 °C)
Derating
55 °C ... 70 °C (2.5%/K)
Connection in parallel
yes, for redundancy and increased capacity
Connection in series
No
Feedback voltage resistance
< 35 V DC
Protection against overvoltage at the output (OVP)
≤ 35 V DC
Control deviation
change in load, static 10 % ... 90 %
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple
< 50 mV
PP
(with nominal values)
Output power
240 W
Typical response time
< 1 s
Maximum power dissipation in no-load condition
< 1.1 W
Power loss nominal load max.
< 18.8 W
Back to top
General
Net weight
0.66 kg
Efficiency
typ. 90 % (120 V AC)
typ. 93 % (230 V AC)
MTBF (IEC 61709, SN 29500)
> 641000 h (40 °C)
Insulation voltage input/output
4 kV AC (type test)
3 kV AC (routine test)
Degree of protection
IP20
Protection class
I (in closed control cabinet)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Housing material
Aluminum / polycarbonate
Mounting position
horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Back to top
Connection data, input
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Stripping length
8 mm
Screw thread
M3
Back to top
Connection data, output
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Stripping length
8 mm
Screw thread
M3
Back to top
Standards
EMC requirements for noise immunity
EN 61000-6-1
EN 61000-6-2
EMC requirements for noise emission
EN 61000-6-3
EN 61000-6-4
Standard - Safety of transformers
EN 61558-2-16
Standard - Electrical safety
IEC 62368-1 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Mains variation/undervoltage
EN 61000-4-11
Back to top
Conformance/approvals
UL approvals
UL/C-UL listed UL 508
UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
UL/C-UL Recognized UL 60950-1
CSA
CAN/CSA-C22.2 No. 60950-1-07
CSA-C22.2 No. 107.1-01
CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
Back to top
EMC data
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Contact discharge
6 kV (Test Level 3)
Discharge in air
8 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Frequency range
80 MHz ... 1 GHz
Test field strength
10 V/m (Test Level 3)
Frequency range
1 GHz ... 2 GHz
Test field strength
10 V/m (Test Level 3)
Frequency range
2 GHz ... 3 GHz
Test field strength
10 V/m (Test Level 3)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Input
4 kV (Test Level 4 - asymmetrical)
Output
2 kV (Test Level 3 - asymmetrical)
Comments
Criterion B
Surge voltage load (surge)
EN 61000-4-5
Input
2 kV (Test Level 3 - symmetrical)
4 kV (Test Level 4 - asymmetrical)
Output
1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Comments
Criterion B
Conducted interference
EN 61000-4-6
Frequency range
0.15 MHz ... 80 MHz
Voltage
10 V (Test Level 3)
Comments
Criterion A
Voltage dips
EN 61000-4-11
Criterion A
Normal operating behavior within the specified limits.
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Back to top
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 25;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top
Classifications
ECLASS
ECLASS 10.0.1
27040701
ECLASS 11.0
27040701
ECLASS 4.0
27040700
ECLASS 4.1
27040700
ECLASS 5.0
27049000
ECLASS 5.1
27049000
ECLASS 6.0
27049000
ECLASS 7.0
27049002
ECLASS 9.0
27040701
Back to top
ETIM
ETIM 4.0
EC000599
ETIM 6.0
EC002540
ETIM 7.0
EC002540
Back to top
UNSPSC
UNSPSC 13.2
39121004
UNSPSC 18.0
39121004
UNSPSC 19.0
39121004
UNSPSC 20.0
39121004
UNSPSC 21.0
39121004
Back to to